Configuring the network settings > 16
D
ETERMINING
THE
NAMES
OF
THE
ITEMS
REQUIRED
FOR
SCAN
TO
NETWORK
PC
Determine the names of the following items and fill in C-2 to C-6 on the “Setup Information
Form,” on page 9.
> User name to log into the destination computer (C-2)
> Password to log into the destination computer (C-3)
> Profile name to register the settings on your machine (C-4)
> Shared folder name on the destination computer (C-5)
> File name of the scanned data (C-6)
C
ONFIGURING
THE
COMPUTER
FOR
SCAN
TO
NETWORK
PC
Register your machine on the computer as a user and then set up a shared folder to which
scanned images are sent and saved.
Windows 7, Windows Server 2008 R2, Windows 2008 and Windows Vista
1. Click Start > Control Panel.
2. Select Add or remove user accounts.
3. Select Create a new account.
4. Enter the user name (C-2) in the text box.
5. Ensure that Standard user is selected, and then click Create Account.
6. Click the icon of the user account created in step 5.
NOTE
If the computer is in a domain, the procedure of adding a user account may
be different to the procedure below.
Refer to Windows help.
NOTE
The procedure below uses Windows 7 as an example. The display may differ
depending on the operating system.
C-2
To Next Page
Loading...
Need help?
General
