Getting started > 21
W
INDOWS
-
SCANNER
AND
PRINTER
DRIVERS
The scanner driver is used for “Pull Scan”, i.e. Initiating a scan from your PC via software.
Compare this to “Push Scan” where you start the scan by pressing a button on the MFP's
front panel.
1. Insert the DVD-ROM and click Easy Installation to start the
driver installer
program.
2. Follow the on-screen instructions to install the drivers.
3. Attach the printer to a USB port of your computer.
4. Switch on the printer.
NOTE
The driver installer program is the recommended installation method.
NOTE
Do not connect the USB cable at this time. You will be instructed when to
connect the USB cable when you run the driver installer program.
To Next Page
Loading...
Need help?
General
