Murdock A172108F-UBL - User Manual

OR
Standard Configuration
Alternate Configuration
A172.8UBL Series
Refrigerated Universal Bi-Level
Barrier Free, Wall Mounted Water Cooler
A172108F-UBL / A172408F-UBL / A172108F-SO / A172408F-SO
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER:
1.800.591.9360
Technical Assistance Fax: 1.626.855.4894
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
WATER COOLERS
COMPLIES WITH
7020-905-001 Date: 07/18/18
Test rating conditions are
compliant with ARI 1010.
Federal
Public Law
111-380
(No Lead)
Member of
MURDOCK
15125 Proctor Ave.
City of Industry, CA
91746 U.S.A.
Phone 800-591-9360
626-336-4561
Fax 626-855-4894
www.murdockmfg.com
NOTES TO INSTALLER:
1. Please leave this documentation with the owner of the fixture when finished.
2. Please read this entire booklet before beginning the installation.
3. Check your installation for compliance with plumbing, electrical and other applicable codes.
LIMITED WARRANTY - UNITED STATES & CANADA
Murdock warrants the compressor and hermetically sealed refrigeration system, including cooling coil assembly
when part of the hermetically sealed refrigeration system, to be free from defects in material and workmanship
under normal use for an additional four (4) years from the end of the one (1) year period described above.
This warranty does not cover installation or labor charges and does not apply to materials, which have been
damaged by other causes such as mishandling or improper care or abnormal use. The repair or replacement of the
defective materials shall constitute the sole remedy of the Buyer and the sole remedy of Murdock under this
warranty. Murdock shall not be liable under any circumstances for incidental, consequential or direct charges
caused by defects in the materials, or any delay in the repair or replacement thereof. This warranty is in lieu of all
other warranties expressed or implied. Product maintenance instructions are issued with each unit and disregard
or non-compliance with these instructions will constitute an abnormal use condition and void the warranty.
Stainless steel must be protected on job site during construction and must be properly maintained after the water
has been introduced into the water cooler or drinking fountain, or Murdock’s limited warranty is void.
LIMITED EXPORT WARRANTY - One year on parts only.
Murdock warrants that every cooler, bottle filling station, packaged water chiller, fountain and accessory to be free
from defects in material and workmanship under normal use for one (1) year from date of install or eighteen (18)
months after the date of shipment from the factory, whichever comes first.
Murdock assumes no responsibility for use of void or
suspended data. © Copyright Murdock, City of
Industry, CA Member of Morris Group International.
Please visit www.murdockmfg.com for most
current specifications.

Summary

Installation Guidance

Technical Support Contact

Provides toll-free phone number and fax for technical assistance.

Installer Responsibilities

Key instructions for installers regarding documentation and code compliance.

Product Warranty

US & Canada Limited Warranty

Details warranty terms, duration, and exclusions for US and Canadian markets.

Export Warranty Terms

Specifies limited warranty for export markets, covering parts only.

Operational Safety Precautions

Electrolysis Prevention

Warns against electrical grounding to water lines which can cause electrolysis.

Dielectric Coupling Requirement

Mandates the use of a dielectric coupling for water supply connection.

Roughing-In and Dimensions

Mounting Height Advice

Recommends consulting local codes for proper fixture mounting height.

Dimensional Drawing Key

Key for understanding plumbing, electrical rough-in points and dimensions.

Critical Installation Procedures

Installation Steps Overview

Covers essential steps like P-trap, ventilation, supply/waste lines, and flushing.

System Requirements & Protection

Details power, grounding, pressure range, and protection against condensation.

Installation Steps

Hanger Bracket Mounting

Instructions for securely mounting the hanger bracket to the wall.

Cooler Mounting and Leveling

Steps for attaching coolers to brackets, ensuring level and secure installation.

Water and Waste Connections

Guidance on connecting supply lines, waste tailpieces, and p-traps.

Startup and Basic Adjustments

Initial Startup Sequence

Steps for turning on water, checking connections, and ensuring fan operation.

Troubleshooting Guide

Addresses common issues like adjustments, compressor, and water temperature problems.

Maintenance and Troubleshooting

Advanced Troubleshooting

Covers compressor cycling, noise, water flow issues, and drips.

Cleaning and Maintenance Advice

Guidelines for cleaning exterior panels and motor components.

Strainer and Cartridge Maintenance

Strainer Screen Care

Instructions for removing, cleaning, and replacing the strainer screen.

Maintenance Parts List

Identifies specific parts and their numbers for maintenance tasks.

Push-In Fitting Installation

Tube Cutting and Preparation

Proper methods for cutting PE tubing and preparing ends for fittings.

Connecting and Disconnecting Fittings

Steps for securely inserting and safely disconnecting tubing from fittings.

Standard Model Parts Diagram

Component Identification Diagram

Exploded view illustrating numbered components of the standard cooler.

Universal Maintenance Tool Use

Explains the functions and usage of the universal maintenance tool.

Sensor Model Parts Diagram

Sensor Component Diagram

Exploded view illustrating numbered components of the sensor-operated cooler.

Flow Restrictor Information

Notes the availability of the flow restrictor with low-flow bubblers.

Complete Parts List

Parts Number Table

Comprehensive table listing all parts with item numbers, part numbers, and descriptions.

Ordering and Repair Guidance

Information on how to order replacement parts and arrange for repairs.

Murdock A172108F-UBL Specifications

General

Brand	Murdock
Model	A172108F-UBL
Category	Water Dispenser
Language	English