Need help?Do you have a question about the Murex Tradesmig 165 and is the answer not in the manual?
Details on electrical shock, fumes, arc rays, and noise hazards.
Procedures for electrical safety and ventilation.
Guidelines for eye protection, body gear, and fire prevention.
Connect the unit to the mains supply correctly.
Safely install and connect the gas cylinder and regulator.
Overview of switches, lamps, and controls on the unit.
How to perform continuous welding.
Faults and remedies for continuous welding.
Faults and remedies for spot welding.
Steps for regular maintenance and cleaning.
General| Input Voltage | 230 V |
|---|---|
| Input Current | 16 A |
| Input Frequency | 50/60 Hz |
| Wire Diameter | 0.6-1.0 mm |
| Weight | 13 kg |
| Protection Class | IP21 |
To Next Page
