Need help?Do you have a question about the Murex Transarc 250 and is the answer not in the manual?
Ensure users are familiar with operation, safety, and workplace conditions.
Always wear recommended safety gear like glasses, gloves, and flame-proof clothing.
Secure connections, qualified electricians for high voltage, fire safety, no operation during maintenance.
Avoid contact with live parts, use insulation, and ensure safe stance.
Use ventilation to keep fumes away from breathing zones.
Protect eyes and body from arc rays with proper screens and clothing.
Identifies mains switch, terminals, remote unit connection, and control panel.
Connects welding and return cables to the appropriate terminals on the power source.
Explains the automatic shutdown and reset of the unit when it overheats.
Shows program version, current, voltage, or percentage during operation.
Explains MMA process, current setting, control options, and enhancements like Hot Start, Arc Force, and VRD.
Details common fault codes like High Temperature (E6) and Communication Error (E14).
Thermal overload tripped; check cooling and duty cycle.
Open-circuit voltage too high; reset unit or contact service.
Check power, connections, and current settings.
Check thermal cut-outs, fuses, and load.
General| Input Voltage | 230V |
|---|---|
| Input Frequency | 50/60 Hz |
| Welding Process | MMA |
| Output Current Range | 20-250A |
| Weight | 15kg |
| Dimensions | 200x300mm |
To Next Page
