Murphy PowerCore MPC-20 User Manual

Section 40 00-02-0897
2015-10-22 - 1 -
Operations Manual Location
After installation, please review the MPC-20 Operations Manual
prior to placing the controller into service. In order to access the
MPC-20 Operation Manual please visit the MPC-20 product
page to download or print a copy located under the literature tab.
www.fwmurphy.com/mpc-20
Hardware Installation
The following instructions will guide you through installing the
MPC-20 controller.
Inspecting Package Contents
Before attempting to install the product, it is recommended that
you ensure all parts are accounted for and inspect each item for
damage (which sometimes occurs during shipping). The items
included in the box are:
MPC-20 Controller kit – P/N 40-70-0490 includes:
• MPC-20 Controller
• 4 (6-32) mounting screws
• 4 (#6) lock washers
• P/N 00-02-0897 MPC-20 Installation Manual
Tools Needed
Use a ¼” drill bit to make the approximately sized 0.250”
mounting holes.

Murphy PowerCore MPC-20 Specifications

General

Brand	Murphy
Model	PowerCore MPC-20
Category	Controller
Language	English