Need help?Do you have a question about the Murphy PowerView PV-101-Cs and is the answer not in the manual?
Allows switching between single and quad display modes.
Manages Diesel Particulate Filter regeneration process for compliant engines.
Choose display language from available options like English, Spanish, French.
Requests and displays stored fault codes from the engine ECU.
Allows viewing the engine's configuration data.
Configures the 1-Up display layout and parameters.
Configures the 4-Up display layout and parameters.
Manages maintenance reminders for engine and machine servicing.
Choose between English (Imperial) and Metric units for display.
Adjusts the display's backlight intensity for better visibility.
Adjusts the display's text and graphics contrast.
View data for optional connected PVA gages.
Resets the gage memory on the PowerView.
Displays configuration, firmware, and language versions.
View/edit J1939 fault code versions for troubleshooting.
Configures settings for backlight dimmer and fuel level input.
Enables and configures engine speed control functions.
Configures Modbus communication settings for the device.
Selects the data rate for CANBUS communication.
Configures the PowerView to listen to specific ECU addresses or all.
Sets the source claim address for the PowerView on the CAN Network.
Resets all settings to factory default values.
Clears machine hours recorded internally by the PowerView.
Manually sets machine hours for tracking purposes.
Configures fuel level setpoints for non-Murphy fuel senders.
Enables or disables the DPF Regen option in the Main Menu.
Enables or disables the Engine Speed Control option in the Utilities Menu.
Describes visual cues like Amber and Red LEDs for faults.
Explains fault indicators displayed on the screen.
Details issues with auxiliary gages and the 'GAGE NOT RESPONDING' message.
Explains how active fault codes from the engine are displayed.
Describes severe fault codes leading to engine derate or shutdown.
Steps to acknowledge and hide displayed fault codes.
Explains the 'Wait to Start' message and its implications.
Describes troubleshooting steps for CANBUS communication failures.
Addresses issues when the ECU does not respond to requests for stored fault codes.
Explains the message indicating no fault codes are stored.
Details situations where no gage data is available.
Explains the 'NO DATA' message for parameter values.
Indicates when parameter data is invalid or not supported.
Describes errors in data transmission from the ECU.
Steps to resolve issues with PVA Gages not functioning.
To Next Page
General
