Don't disassemble your ARTisan or attempt repairs unless directed
by SignWarehouse technical support.
Don't drop any liquids or metal objects into your ARTisan. Liquids or impact
from hard or heavy objects may damage the equipment.
Touching your ARTisan’s blade with your finger may result in injury.
Don't damage or replace the power cable supplied with the vinyl cutter.
Don't excessively bend, pull, or fold the power cable or place weight on it.
Crimping the power cable may result in risk of failure or electric shock.
If you're not going to use your ARTisan for a long time, unplug the power
cable from the outlet.
Placing your hands on the cutting platen during operation may result in injury.
Place your cutter on a stable surface. Operating the vinyl cutter on an
unstable surface may result in a fall that can damage the equipment or
internal components.
To unplug the power cable from a receptacle, always grasp the
plug instead of the cable. Pulling the cable may damage it and
increase the risk of fire or electric shock.
Don't operate during an electrical storm where lightning is present. For protection
against power surges, a surge protector is recommended.
Don't physically move the cutting head while your ARTisan is powered on.
Manually moving the cutting head during operation may damage the main board.
To Next Page
Loading...
