Introduction and Safety
1.0 Support
1.1 Safety & Warnings
For ARTisan support, please go to
https://techsupport.signwarehouse.com/muse-vinyl-cutter-support-resources/
Please read the following safety guidelines regarding use of your Muse cutter:
Symbols inside triangles represent important notes that warrant your full attention. There are
different symbols denoting specific warnings. The symbol at left, for example, warns of a
possible danger of electric shock.
The cross-bar indicates activities that are prohibited because of risk of injury or possible
damage to your equipment. This particular symbol at left warns against the use of tools to
remove parts of the equipment.
Don't use with an electrical power source which doesn't meet the required voltage rating.
Using with substandard sources of electricity may result in fire or electric shock.
Don't use your ARTisan if it begins to emit an odor or smoke.
Don't un-plug your ARTisan while powered on. Doing so may damage the equipment.
Make sure your ARTisan is grounded. Using your ARTisan without it being grounded may
result in risk of equipment damage or electric shock.
1
Thank you for choosing an ARTisan vinyl cutter.
To Next Page
Loading...
