OpAmps could seriously damage your equipment. In case of unauthorised
manipulation,themanufacturersguaranteewillbevoid.
On the rear panel of this unit you can find signal and SENSE return
sockets,aswellasthemainspowersupplyelements.
13.-INPUT:SignalinputoftheISP-1014processor.XLRfemalesocket.
This socket is connected directly to the channel input socketontherear
rackpanel.
14. -LOW SENSE INPUT: SENSE input for the bass way. This line comes
directlyfromthemaleXLRconnectorofthepoweramplifieroutput.Instant
information about the power is constantly sent here from the amplifier to
theprocessor.
ATTENTION! If this SENSE line is disconnected or damaged, the power
controlcircuitswillnotwork,resultingindamagedsubbassloudspeakers.
Insuchcase,theguaranteewillnotcovertherepairofthespeakers.
15.-LOWOUT:Bassoutputsignal.Thissocketisconnectedtothesignal
input socket of the bass power amplifier through a female aerial XLR
connector.
16.-MIDSENSEINPUT:SENSEinputforthemidfrequenciesway.Thisline
comes directly from the male XLR connector of the power amplifier output.
Information about the power is constantly sent here from the amplifier to
theprocessor.
ATTENTION! If this SENSE line is disconnected or damaged, the power
controlcircuitswillnotwork,resultingindamagedsubbassloudspeakers.
Insuchcase,theguaranteewillnotcovertherepairofthespeakers.
17.-MIDOUT:Midfrequenciesoutputsignal.Thissocketisconnectedto
the signal input socket of the mid frequencies power amplifier through a
femaleaerialXLRconnector.
18. - HIGH SENSE INPUT: SENSE input for the high frequencies way.This
line comes directly from the male XLR connector of the power amplifier
output. Information about the power is constantly sent here from the
amplifiertotheprocessor.
ATTENTION! If this SENSE line is disconnected or damaged, the power
controlcircuitswillnotwork,resultingindamagedsubbassloudspeakers.
Insuchcase,theguaranteewillnotcovertherepairofthespeakers.