EasyManua.ls Logo

Muskoka 25-900-003 - User Manual

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PLEASE READ THIS MANUAL BEFORE
INSTALLING AND USING APPLIANCE
WARNING!
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT
CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
Retain this manual for future use.
VEUILLEZ LIRE CE MANUEL AVANT L’INSTALLATION
ET L’UTILISATION DE VOTRE FOYER
AVERTISSEMENT!
SI LES RENSEIGNEMENTS DE CE MANUEL NE SONT PAS EXACTEMENT
SUIVIS, UN CHOC ÉLECTRIQUE OU UN INCENDIE PEUT SURVENIR, ET
CAUSER DES DOMMAGES, DES BLESSURES OU LA PERTE DE VIE
Conserver ce manuel pour une utilisation ultérieure.
20-10-304
POR FAVOR LEA LAS INSTRUCCIONES DE
INSTALACIÓN Y DE OPERACIÓN ANTES DE
USAR ESTA CAJA DE FUEGO
¡ADVERTENCIA!
SI NO SIGUE EXACTAMENTE LA INFORMACIÓN EN ESTE MANUAL, PODRÍA
RESULTAR EN CHOQUES ELÉCTRICOS O INCENDIO QUE PUEDEN CAUSAR
DAÑOS A LA PROPIEDAD, LESIONES PERSONALES O LA PÉRDIDA DE LA VIDA.
Guarde este manual para futuras referencias.
25-900-003
USE AND CARE GUIDE | GUIDE D’UTILISATION ET D’ENTRETIEN | GUÍA DE USO Y CUIDADO
ELECTRIC FIREBOX FOYER ÉLECTRIQUE HOGAR ELÉCTRICO
IMPORTANT:
SAVE THESE
INSTRUCTIONS.
IMPORTANT :
CONSERVER CES
INSTRUCTIONS.
IMPORTANTE:
GUARDE ESTAS
INSTRUCCIONES.
Français p. 13 | Español p. 25

Table of Contents

Questions and Answers

  • R
    Robert FrenchAug 12, 2025
    Why is my Muskoka Indoor Fireplace heater not working?
    • M
      Michael LarsonAug 12, 2025
      Your Muskoka Indoor Fireplace heater may not be operating due to several reasons. First, ensure you are operating it correctly by referring to the operating instructions. Another potential cause could be that the thermostat setting has been satisfied, so try increasing the desired room temperature on the control panel or remote. Also, there might be dust or debris blocking the sliding door. To resolve this, unplug the unit, clear the door area, wait five minutes, then plug it back in and turn on the heater.
  • J
    Jeffrey SalasAug 19, 2025
    What to do if my Muskoka Indoor Fireplace is not operating?
    • L
      longmelindaAug 19, 2025
      If your Muskoka Indoor Fireplace isn't turning on and the power light is off, start by ensuring the fireplace is properly plugged into a standard 120V outlet. Also, check your circuit breaker or fuse box, as a tripped breaker or blown fuse could be the issue. Ideally, the fireplace should be on a dedicated 15-amp circuit.
  • E
    etannerAug 27, 2025
    Why is my Muskoka Indoor Fireplace making excessive noise when the flame is on?
    • A
      Ashley WoodsAug 27, 2025
      If your Muskoka Indoor Fireplace is making excessive noise when the flame is on but the heater is off, it could be due to the rotating flame reflector shaft rubbing against the housing. To resolve this, turn off the unit, open the back of the firebox, and carefully reposition the flame reflector shaft.
  • J
    Jeffrey JohnsonSep 2, 2025
    Why is my Muskoka Indoor Fireplace making excessive noise when the heater is operating?
    • J
      John YoungSep 2, 2025
      If your Muskoka Indoor Fireplace is making excessive noise when the heater is operating, it might be due to a dirty or clogged blower. Refer to the 'Maintenance of Motors' section in the Maintenance section of this manual (pg.9).

Muskoka 25-900-003 Specifications

General IconGeneral
Model25-900-003
TypeElectric Fireplace
Voltage120V
Remote ControlYes
Fuel TypeElectric
Efficiency100%
FinishBlack
Heating Area400 sq ft
MaterialMetal & Glass

Related product manuals