Oliverb: Inputs and outputs
All CV inputs are calibrated for a range of +/- 5V. Voltages outside of this range are
tolerated, but will be clamped.
1. FREEZE gate input. When the input gate signal is high, stops the recording of incom-
ing audio, just as latching the FREEZE button would do.
2. GATE (TRIGGER) input. When the input is high, 1 of 4 glitch algorythms are applied
to the spectrum. Each time the gate goes high, another is randomly selected.
These algorythms are: Spectral hold and blow, Spectral shift up and aliasing, Kill larg-
est harmonic and boost second largest, Nasty high-pass
3. 4. PRE-DELAY (POSITION) and SREVERB SIZE (SIZE) input.
5. PITCH CV input, with V/Oct response.
6. BLEND CV input. This CV input can control one of the following functions depending
on the active blending parameter.
7. 8. Stereo audio input. When no patch cable is inserted in the right channel input, this
input will receive the signal from the left channel.
9. 10. DECAY (DENSITY) and DIFFUSE (TEXTURE) inputs.
11. 12. Stereo audio output.
To Next Page
Loading...
