Need help?Do you have a question about the Mutable Instruments Beads and is the answer not in the manual?
General| Depth | 25 mm |
|---|---|
| Sampling Rate | 48 kHz |
| Bit Depth | 16-bit |
| Audio Outputs | Stereo |
| Audio Input Impedance | 100k Ohm |
| Audio Output Impedance | 1 kΩ |
| Function | Real-time granular synthesis and texture processing |
| Controls | Density, Size, Pitch, Time, Feedback, Mix, Texture |
Beads operates in mono or stereo based on the patching of audio inputs.
Beads automatically adjusts input gain when patch cables are inserted or removed.
Allows manual gain adjustment by holding the quality selector button.
The FREEZE button and gate input disable recording and back up the buffer.
Enables latched grain generation by holding the SEED button or pressing FREEZE.
Uses external clock or sequence signals for grain generation via SEED input.
Generates grains when SEED button is held or SEED input receives a gate signal.
Controls grain replay position and direction within the buffer.
Manages transposition of grains in semitones.
Adjusts grain duration and playback direction (forward/reverse).
Defines the amplitude envelope of the grains.
Controls CV modulation amount or repurposes CV input for randomization.
Manages the amount of output signal fed back into the processing chain.
Controls the balance between the original and processed signals.
Adjusts the level of reverberation applied to the signal.
Assigns and adjusts CV modulation for knobs J, K, and L.
Details stereo processing and summed output behavior.
Manual control of delay time via DENSITY knob and CV input.
Sets base delay time by external clock or tapping the SEED button.
DENSITY knob selects subdivisions of the base delay time.
Operation as a delay or continuously looped slice with TIME knob selection.
To Next Page
