Resonator: Controls (Cont.)
J. BLEND knob. This multi-function knob is described in the Blending parameters sec-
tion.
K. Indicator LEDs. They work as an input vu-meter. When FREEZE is active, they moni-
tor the output level. Soft-clipping occurs when the last LED is on. They can also indicate
the quality setting (red), the function assigned to the BLEND knob (green), or the value
of the four blending parameters (multicolor).
Resonator: Blend Functions
Dry/Wet (first function of Blend knob and CV)
Crossfades between the dry and the wet signal.
Stereo output (second function of Blend knob and CV)
Assigns each part and voice to an output (Out L or Out R). Fully CCW, each voice goes
to a different output. At 12 o'clock, both voices are equally mixed in both output. Fully
CW, parts of both voices are distributed on both output for a wide stereo effect.
Scatter (third function of Blend knob and CV)
Controls the random delay times before the sound (input or burst) hits each resonator
of the current voice. Used for K-S synthesis with a chord, this will give the impression
that strings are struck sloppily. The delay times are randomized at each voice switch.
Harmonics (fourth function of Blend knob and CV)
Simulates striking the harmonics on a string. Fully CCW, it has no effect. Fully CW, the
second harmonic will ring; at 12 o'clock, the third, at 10 the fourth etc.
To Next Page
Loading...
