Need help?Do you have a question about the MV Agusta Brutale 990 R and is the answer not in the manual?
General| Displacement | 998 cc |
|---|---|
| Transmission | 6-speed |
| Rear Suspension | Single shock absorber with rebound and compression damping and spring preload adjustment |
| Seat Height | 830 mm (32.7 inches) |
| Frame | Steel tubular trellis |
| Front Brakes | Dual 310mm discs, 4-piston calipers |
| Rear Brakes | Single 210 mm disc with 2-piston caliper |
| Engine Type | Four cylinder, 4 stroke, 16 valve |
| Front Suspension | Marzocchi 50mm upside-down fork, adjustable rebound and compression damping |
Details crucial safety precautions related to hazardous materials and operations.
Outlines recommended maintenance intervals and operations based on mileage.
Details the procedure for checking and adjusting valve clearance.
Covers tickover checks, CO synchronization, and throttle body adjustments.
Details checking fluid levels, leakages, and commands for brakes and clutch.
Details checks for the functionality of dashboard instruments and warning lights.
Details the procedure for removing the motorcycle's fuel tank.
Explains the type and parameters of the injection-ignition system.
Explains factors determining injection time and volume.
Explains the operation and control of the fuel pump system.
Covers the Weber-Marelli diagnostic software for system checks.
Presents the comprehensive electrical wiring diagram for the motorcycle.
Covers battery maintenance, charging, and assembly procedures.
Details how to check the starter motor for faults and continuity.
Details the steps for removing the front wheel, including caliper removal.
Explains the procedure for assembling the front wheel and brake calipers.
Shows an exploded view and torque specifications for the front fork components.
Details the process of overhauling the front fork, including stem removal.
Covers the removal and overhaul of the steering assembly components.
Provides specifications and an overview of the rear suspension system.
Explains the procedure for removing the rear wheel.
Covers the removal and overhaul of the swingarm and related components.
Details the process of removing the motorcycle's drive chain.
Explains how to reassemble the drive chain using a new connecting link.
Guides on adjusting the motorcycle's suspension setup.
Details the process for checking front and rear wheel balance.
Outlines initial steps for frame removal, including using special tools.
Details the steps for disassembling the motorcycle frame.
Provides essential reference measurements for checking the frame's condition.
Guides on the process of assembling the frame back onto the motorcycle.
Details the procedure for removing the rear sub-frame.
Provides an overview of the front brake system with specifications and torque values.
Explains how to substitute front brake pads for the 990 R model.
Details front brake pad replacement for the 1090 RR model.
Covers replacing and bleeding the front brake fluid system.
Explains the process of substituting front brake calipers.
Covers replacing and bleeding the rear brake fluid.
Lists torque specifications for cycle parts excluding the engine for the 990 R model.
Lists torque specifications for cycle parts excluding the engine for the 1090 RR model.
Provides diagnostic information for various electrical system issues.
Provides diagnostic steps for instrument panel issues.
Details diagnostic steps for injection and ignition system errors.
Covers diagnostic procedures for fuel injection system faults.
Details diagnostic steps for ignition system problems.
To Next Page