- 87 -
ADJUSTMENTS 5
5
5.6.1. Spring preload
The adjustment is obtained from the standard
position, which is found by fully turning the adju-
sting nut counterclockwise and then clockwise
(see enclosed table). Rotate clockwise to increa-
se the spring preload or counterclockwise to
decrease it.
CLICK!
CLICK!
CLICK!
5.6.2. Rebound damper (front suspension)
The adjustment is obtained from the standard
position, which is found by fully turning the screw
clockwise and then counterclockwise (see enclo-
sed table). Rotate clockwise to increase the dam-
ping action or counterclockwise to decrease it.
To Next Page
Loading...
