MWM 10 Series User Manual

32
9.610.0.006.0109
REMARKS: 1) This table is for reference purposes only. The vehicle manufacturer maintenance table prevails on this. 2) For applications where the engines are strictly required, or used in off-road, the maintenance should occur in half of the periods indicated above. 3) If the engine remains out of use for a long period, its necessary to turn it on every 2 weeks, and wait until it reach the work temperature. 4) The engine lubricant oil must follow the range of replacement indicated above or the maximum utilization period of 6 months, what occur first. 5) The coolant liquid must follow the range of replacement indicated above or the maximum utilization period of 12 months, what occur first.
SÉRIE 10 ENGINES (4 and 6 Cyl.) - Marine
1.000 h
P P P P P P
500 h
P
250 h
P P P P
DAILY
P P P P P
MAINTENANCE PLAN
DRAIN FUEL FILTER CHECK LUBRICANT OIL LEVEL CHECK COOLING LIQUID LEVEL CHECK ENGINE LEAKS CHECK TUBES AND CONNECTIONS CHANGE LUBRICANT OIL CHANGE LUBRICANT OIL FILTER CHANGE FUEL FILTER(S) CHECK THE ZINC PROTECTIONS CHANGE AIR FILTER ADJUST VALVE CLEARANCE WASH THE AIR FILTER TEST THE NOZZLES CHANGE BELT CHANGE COOLING SYSTEM LIQUID TEST INJECTION PUMP

MWM 10 Series Specifications

General

Brand	MWM
Model	10 Series
Category	Engine
Language	English