MWM D229-3 - User Manual

Manual de
Operação e Manutenção
Manual de
Operación y Mantenimiento
Operation and
Maintenance Manual

Summary

INTRODUCTION

ENGINE TYPE

ENGINE SERIAL NUMBER

Details on engine identification and serial number location on the block.

IMPORTANT

STARTING

ENGINE RUNNING-IN PERIOD

COOLANT FLUID CHECK

THERMOSTAT TEST

COOLING SYSTEM CLEANING

COOLING FLUID ADDITIVES

ANTIFREEZE - USAGE

LUBRICANT OIL LEVEL CHECK

LUBRICANT OIL AND FILTER CHANGE

LUBRICATING OIL

FUEL SYSTEM DRAINAGE

FUEL STORAGE

INJECTION NOZZLE AND INJECTION PUMP TEST AND ADJUSTMENT

FUEL INJECTION PUMP - INDEPENDENT LUBRICATION

Specific instructions for fuel injection pumps with independent lubrication.

BLEEDING OF DELIVERY PUMP

BLEEDING OF HIGH PRESSURE

ENGINE BREATHER CLEANING

VALVE CLEARANCE ADJUSTMENT

TENSION CHECK

COMPRESSION TEST

LEAK CHECK

WATER, LUBRICANT OIL AND FUEL

Checks for leaks in water, lubricant oil, and fuel systems.

COOLING SYSTEM LEAK CHECK

Checking the cooling system for leaks.

LUBRICANT OIL SYSTEM LEAK CHECK

Checking the lubricant oil system for leaks.

FUEL SYSTEM LEAK CHECK

Checking the fuel system for leaks.

MWM D229-3 Specifications

General

Engine type	Diesel
Aspiration	Naturally aspirated
Number of Cylinders	6
Fuel System	Direct injection
Cylinders	Inline
Cooling System	Liquid-cooled