EasyManua.ls Logo

Mx Onda MX-PI2633FLEX - Turbo Function; Control Panel Lock

Mx Onda MX-PI2633FLEX
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
TURBO FUNCTION
The Turbo function is used to temporarily increase the power of the chosen
cooking zone, and thus to be able to obtain a more powerful and faster cooking
in a short period of time. We recommend that you use the Turbo function with
caution and only temporarily as excess power can burn or overheat food.
Using the Turbo function
1. To activate the Turbo mode in a cooking zone, touch the selection button
3 ( ), 4 ( ), 5 ( ) or 6 ( ) corresponding to the desired cooking
zone, the power indicator of the selected cooking zone will show the
selected power level flashing.
2. Then touch the Turbo function button 9 ( ) and the power indicator will
show the indication “
b
” which is the Turbo (Boost) mode.
3. To cancel the Turbo function, using the selection buttons 3 ( ), 4 ( ),
5 ( ) or 6 ( ) choose the cooking zone that has this function activated,
when the indication
b
is flashing, touch the function button Turbo 9 ( )
and the power indicator will show the level selected before activating the
Turbo function.
Note: The Turbo function increases the power considerably, so we recommend
that you use it with caution as cooking times can vary and excess
temperature can burn the food.
CONTROL PANEL LOCK
You can lock the control panel to prevent unintentional use (for example,
children accidentally turning on the cooking zones).
When the control panel is locked, all the buttons are locked except the Power
on / off button 1 ( ) only to turn off the hob and the control panel lock / unlock
button 11 ( ).
To lock the control panel
Touch the control panel lock button 11 ( ) and the timer indicator will show
the indication “
Lo
.
To unlock the control panel
1. Touch and hold your finger on the Lock Button 11 ( ), until the indication
Lo
” disappears from the screen.
2. Now the control panel is unlocked and the board can be used.
When the induction hob control panel is in lock mode, all buttons
are disabled except the Power on / off button 1. You can always
turn off the induction hob using the Power on / off button 1 in case
of emergency, then you need to unlock the control panel.

Related product manuals