My Pet Command DF113R - Boundary Width Control Switch; Boundary Wire Terminals; Power Light; Loop Indicator Light

- 10 -
Boundary Width Control Switch:
This knob allows you to adjust the Boundary
Width, which is the combination of Warning
Zone and Vibration & Static Correction Zone.
Boundary Wire Terminals:
These terminals are where the Boundary Wire
connect to the Fence Transmitter in order to
form a continuous loop, designating the pet
area.
Power Light:
This light indicates if the system is on or off. If
the light is glowing, the system is on and
functioning.
Loop Indicator Light:
This light indicates whether or not the
Boundary Wire is forming a complete loop