- 45 -
To set the static shock level, press the “+” or
“-“ button to select a suitable shock level, then
press and hold on the “ ” button for around
8 seconds of continuous static stimulation, or
press one time, for a solitary 1 second shock.
To set the vibration level, press the “+” or
“-“ button to select a suitable level, then press
and hold on the “ ” button for around 8
seconds of continuous vibration, or press one
time, for a solitary 1 second vibration.
Charging
Both the transmitter and the receiver charge
quite rapidly advisable to charge for 4 hours at
a time and for 8-10 hours before first use.
Both can be charged at the same time and
To Next Page
Loading...