- 46 -
have a common adaptor. To recharge, simply
open the rubber cover, and plug the adaptor
contact pin into your household AC power
outlet, and then insert the adaptor plug into
the receiver DC jack.
The Transmitter and Receiver Collar can be
charged by connecting a USB Cable and other
5V DC power supply, such as cell phone
notebook, and computer adapters. Do not
charge batteries in especially hot areas, and
keep far any heat source such as a fireplace or
heater.
Receiver Collar Charging
When the charger is plugged in, you will
notice the red Led indicates it’s charging.
The green LED light will replace the red light
when the Receiver Collar is fully charged, but
always make sure you charge it for 4 hours at
a time (8-10 hours before first use) to make
To Next Page
Loading...