- 48 -
this means the battery is low and the device
should be charged immediately.
It is always advisable to keep all units plugged
in on Charge when not in use.
Troubleshooting Guide
Problem#1: No stimulation when Remote
Trainer button is pressed.
The Receiver Collar has not been
activated. Remember that the Receiver
Collar must be turned on before use.
The Receiver Collar has not been set to
your Remote Trainer. Follow the
instruction above for directions.
The batteries in either the Receiver
Collar or the Remote Trainer are dead.
Recharge or replace, as needed.
Problem#2: The Beeper on Receiver Collar
To Next Page
Loading...