- 13 -
Transmitter Key
“ ” and “ “ These buttons are the
stimulation adjustment settings. Press up or
down to adjust the shock intensity and
vibration from level 1 to 10.
“ ” This is the On/Off button. Hold this
button for 2 seconds to switch the power on.
The power light will glow, and the LCD will
then display the default “A01”, indicating the
device is on. You can change Dog ID by
pressing buttons 1, 2, or 3 at the bottom of the
transmitter. To switch the power off, hold this
button for 2 seconds and the power light
indicator will switch off.
To Next Page
Loading...