- 15 -
the transmitter is paired with based on what
is displayed in the LCD display screen. If collar
1 is selected, the LCD screen will display dog
ID “A XX”. If you would like to switch to
collar 2, press the “2” button. The LCD will
then display “BXX”. And last, if you would
like to transmit to collar 3 press the “3” button.
Again, the LCD will display “C XX”.
A = Dog 1
B = Dog 2
C = Dog 3
“XX” = The shock & vibration level.
The transmitter has the capability to maintain
the suitable shock & vibration levels for each
individual dog.
Important: The red LED light will flash when the
battery power is low. Recharge battery at once,
when this is noticed. (The transmitter should
also be charged before your first use and all
To Next Page
Loading...