7. Coat the stone with stone separator and bolt the top half of
the ask in place. The utility wax should ll the injection port
of the ask. This will keep the stone from leaking out during
the second half of the investing process.
8. Pour up the ask using myerson, LLC’s Investing Stone
INVSTONE-25LB. Notice the stone is not protruding from
the widow in the ask.
9. When the last half of the stone is set, remove the bolts but
leave the ask together and place in boiling water.
10. Once all the wax has been removed, bolt the two halves
together.
16
To Next Page
Loading...
