MyKronoz ZeFit2 Pulse - Charging

5
1. CHARGING
Charge ZeFit
2
Pulse for two hours before your
first use.
1. Put ZeFit
2
Pulse on the magnetic charging
dock
2. Make sure the pin on the charging dock fit
correctly onto the charging terminals on the
back of ZeFit
2
Pulse
3. Plug the small end of the USB cable
provided into the charging’s dock USB port
4. Plug the big end of the USB cable into a
power source
5. A battery indicator will fill to indicate
charging is in progress. Once ZeFit
2
Pulse is
charged, the battery indicator will be full
i
A full charge takes 1:30 hour. When the
battery level gets low, a battery indicator
will appear.