MYLAN WhisperJECT - Step 5: Reassemble the Autoinjector; Align and Turn Syringe Housing; Step 6: Select and Clean Injection Site; Prepare Injection Site

Step 5 – Reassemble the Autoinjector
Place the Autoinjector on a clean
surface before preparing your
injection site.
Select the injection site. See the
Patient Information Lea et/Brochure
for the allowable injection sites.
Clean injection site with alcohol swab.
Step 6 – Select and Clean Injection Site
Reassemble the device by
aligning the white arrows and
turning the Syringe Housing
until it locks into the Handle.
You will hear a “CLICK” as the
two parts lock together.
Once the Autoinjector is fully
assembled, you are ready to
start the injection process.
18 19