DESCRIPTION
This manual describes your Myron L DS meter, tells you how to
use it, and how to keep it working accurately for many years.
Your model 532 three range DS Meter is a compact instrument
which operates on the principal of electrical conductivity. It will
quickly determine the conductivity or ppm/Total Dissolved Solids
of almost any solution. Model 532M1 has a dial calibrated in
micromhos (µmhos), which is equivalent to the metric microsiemens
(µS). Models 532T1 and 532T2 convert the conductivity directly
into parts per million (ppm) of Total Dissolved Solids. All are 3.4" x
4.5" x 4.0" (85 x 129 x 126mm) and weigh less than one pound
(.45 kg). DS Meters are completely self contained. The built-in cell
is automatically temperature compensated from 50° to 160°F (10°
to 71°C). They are powered by a 9 volt battery good for at least
2000 tests, or one year shelf life.
MODEL RANGES
532T1 0-50, 0-500, 0-5000 ppm
532T2 0-25, 0-250, 0-2500 ppm
532M1 0-50, 0-500, 0-5000 µmho
By using an RE-10 Range Extender (see ACCESSORIES), the
maximum range of each meter may be increased ten times.
The pictures in this manual show the major operating parts of
your Myron L DS Meter. Handle your DS Meter and identify these
parts to become familiar with it.
Model 532T1 shown
To Next Page
Loading...
Need help?
General
