To Next PageTo Next Page
Need help?Do you have a question about the Myron L ULTRAPEN PT1 and is the answer not in the manual?
General| Resolution (pH) | 0.01 pH |
|---|---|
| Temperature Compensation | Automatic |
| IP Rating | IP67 |
| Resolution | 0.1 °C/°F |
| Measurement Range (pH) | 0 - 14 pH |
| Temperature Range | 0 - 50 °C (32 - 122 °F) |
| Accuracy | +/- 0.01 pH |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Battery Life | >100 hours |
| Measurement Range (Conductivity) | 0 to 1999 µS/cm |
| Resolution (Conductivity) | 1 µS/cm |
| Calibration (pH) | 1-point (4.0, 7.0, or 10.0) |
| Power Source | 1 x N Type Battery |
Highlights the accuracy, reliability, and simplicity of the pen.
Lists all items included in the PT1 tester package.
Overview of the Myron L ULTRAPEN PT1's design and capabilities.
Details measurement range, accuracy, resolution, power, and physical properties.
Guide to selecting the correct measurement mode for the PT1 tester.
Instructions for setting temperature units (Celsius or Fahrenheit).
Steps for performing measurements, including rinsing and dipping the pen.
Instructions for Wet and Factory Calibration of the PT1 tester.
Condensed steps for turning on and using the PT1 pen.
Guide to replacing the battery in the PT1 tester.
How to clean and maintain the PT1 pen for optimal performance.
Information on calibration solutions and other available items.
