MYSON POWER EXTRA
SPRING RETURN ZONE VALVE
MPE 222 / MPE 2 3/4 “- 2 PORT 22mm VALVE
Thank you for choosing a MYSON heating control.
The MPE 222 is designed to control water circulation in primary hot water
or central heating circuits. The motor is powered to open the valve with a
spring return to the closed position.
The valve is not directionally sensitive and may be fitted with flow through
either Port A or Port B.
For convenience the neon indicator light illuminates, indicating when the
valve is open.
When the manual lever is moved to the right, the valve is open. This is used
when filling, venting or draining the system. The spring return valve rests
in the closed position.
TECHNICAL SPECIFICATION
Motor Supply Voltage 230 V AC
Frequency 50 Hz
Power Consumption 6 W
Motor Insulation Rating Class ‘F’
Maximum Working Pressure 10 Bar
Maximum Water Temperature 95
o
C
Maximum Ambient Temperature 52
o
C
KV value 6.7
Switch Rating 3(0.5) A
High Temperature Silicon Cable 1100mm
Valve Body Brass with spring loaded
Mica filled PTFE shoes
Actuator Power to Open
Spring to Close
MPEDOC002 Issue: 9
To Next Page
Need help?
General
