MYSON POWER EXTRA
SPRING RETURN MID-POSITION
MPE 322 /328 & MPE3 3/4“ / MPE3 1”
3 PORT 22mm VALVE
Thank you for choosing a MYSON heating control.
The MPE 322/328 is designed to control water circulation in primary hot
water and central heating circuits, by diverting flow to either circuit or to
both simultaneously using a single valve.
For convenience the two neon indicator lights illuminate indicating which
port is open.
When the manual lever is moved to the right, ports A and B are open, this
is used when filling, venting or draining the system. The spring return,
Mid-Position actuator – valve rests in the hot water only position.
TECHNICAL SPECIFICATION
Motor Supply Voltage 230 V AC
Frequency 50 Hz
Power Consumption 6 W
Motor Insulation Rating Class ‘F’
Maximum Working Pressure 10 Bar
Maximum Water Temperature 95
o
C
Maximum Ambient Temperature 52
o
C
KV value 6.6
Switch Rating 3(0.5) A
High Temperature Silicon Cable 1100mm
Valve Body Brass with spring loaded
Mica filled PTFE shoes
Actuator Power to Open
Spring to Close
MPEDOC001 Issue: 8
To Next Page
Need help?
General
