consists of a room unit and a relay box.
The ROOM UNIT is programmable a room thermostat.
It measures the temperature of your room and then controls the
heating to maintain the room at the chosen temperature.
IMPORTANT : Do not place or fi t the ROOM UNIT where it will be
affected by heat from radiators, sunshine,
The relay box is wired to your heating equipment by your
electrician. The room unit communicates with the relay box by
radio waves, thus switching on/off your heating.
If your MPRT RF has already been installed you need only follow
, to operate your heating.
On your room unit you set the value of three temperatures, Low,
“Low” is typically a night setting, “Medium” an afternoon setting,
and “High” a morning and evening setting.
Your room unit will then operate your heating to maintain these
Follow steps 1 to 3 below.
MON
TUE WED
THU FRI SAT SU
N
High Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SU
N
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
Use and to alter the blinking text (hours).
proceed to minutes and change using
Press to proceed to day and change using and .
The time is now set and the screen returns to normal.
MON
TUE WED
THU FRI SAT SU
N
High Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SU
N
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
If the screen above appears without the days of the week displayed it
means the room unit has been set up to give the same temperatures ever
means the room unit has been set up to give the same temperatures every means the room unit has been set up to give the same temperatures ever
If you wish to change this set up to enter for individual days press
to exit. Then press and together and hold down for 10 seconds.
Press to enable daily time settings. Press to accept.
Now press and follow the instruction below.
(To revert to the same programme each day repeat the above process.)
Now press and follow the instruction below.
(To revert to the same programme each day repeat the above process.)
Now press and follow the instruction below.
When the daily programme is enabled, t
temperatures for the 24 hours of Monday.
indicated by , a Mid temperature by , and a High temperature
by . If you are happy with the temperatures entered for Monday,
Tuesday’s temperatures appear.
If you are happy with these temperatures press again, and so
Press . The screen returns to normal.
If you are not happy with the temperatures on any particular day,
you can change them. For example, in the fi gure below, to change
the settings on the left (LLLLLLMHHLL) to those on the right you
would press the button sequence LLLLLMMHHHH
MON
TUE WED
THU FRI SAT SU
N
High Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SU
N
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
MON
TUE WED
THU FRI SAT SU
N
High Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SU
N
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
MON
TUE WED
THU FRI SAT SU
N
High Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SU
N
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
MON
TUE WED
THU FRI SAT SU
N
High Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SU
N
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
MON
TUE WED
THU FRI SAT SU
N
High Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
MON TUE WED THU FRI SAT SUN
0 2 4 6 8 10 12 14 16 18 20 22 24
High Setting
Current
Time
MON TUE WED
THU FRI SAT SU
N
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
TO ACCEPT & CONTINUE PRESS OK
TO CHANGE VALUE PRESS OR
FOR LOW PRESS “L”, FOR MEDIUM PRESS “M”, FOR HIGH PRESS “H”
TO ACCEPT & CONTINUE PRESS OK
Low Setting
Current
Temp
0 2 4 6 8 10 12 14 16 18 20 22 24
12 14 16 18 20 22 24
SAT SUN SMART START
12 14 16 18 20 22 24
SAT SUN SMART START
0 2 4 6 8 10 0 2 4 6 8 10
0 2 4 6 8 100 2 4 6 8 10
Use or to set the “High” temperature.
Your have now set your high temperature.
he screen returns to normal.
To set your “Medium” temperature, follow the same procedure as
above except press instead of .
To set your “Low” temperature, follow the same
above except press instead of .
“SMART START” varies the start-up times to ensure that the build-
ing achieves temperature by the required time.
The smart start system is continually learning the temperature rise
requirement, delaying the start up of the system, therefore saving
energy during milder weather.
To toggle the Smart-Start function between enabled and disabled,
hold and down for 10 seconds.
The button can now be used to toggle Smart-Start between