OPTIONAL ACCESSORIES
The following accessories and tools are available for this unit, and can be purchased separately at your local Mytee
dealer. You can find more information on any of them at www.mytee.com.
System Maintainer Machine
Rinse (3601)
Crevice tool (8700)
Collapsible wand (8390)
ATTACHING HANDLE
Step 1 – Put washers on bolts as pictured.
Step 2 – Thread all four bolts into the inserts on back of machine by hand.
Step 3 – After threading by hand, use a 7/16 wrench to tighten (Do not over tighten)
To Next Page
Loading...
