Step 3 - Unlock latch connecting recovery tank and solution tank. Remove recovery tank from solution tank.
Carefully fill up solution tank. (Do not spill fluid in to vacuum chamber)
ATTENTION: Do not use recovery tank to fill solution tank. Residual dirt or debris will cause damage to
solution pump.
WARNING: Flammable materials can cause an explosion or fire. Do not use flammable materials in
tank(s).
FOR SAFETY: When using machine, follow mixing and handling instructions on chemical containers.
ATTENTION: If using powdered cleaning chemicals, mix prior to adding.
Step 4 - Replace recovery tank onto solution tank. Lock latch.
Step 5 – Connect solution hose and make sure it is firmly secure.
To Next Page
Loading...
