MyWeigh 440-Z User Manual

Steps for installing batteries: open cover, insert batteries with correct polarity, close cover until it clicks shut.

Instructions for turning on/off the scale, selecting weighing units, and starting the weighing process.

How to eliminate the weight of an empty container using the Tare function before weighing items.

Step-by-step guide to calibrate the scale using an accurate 200g weight.

Scale performs a diagnostic check and displays a countdown upon power-up.

Display shows 'EEEE' indicating overload; remove load immediately to prevent damage.

Tared value displayed as negative; press a button to re-zero the scale.

Automatic power-off feature conserves battery after 2 minutes of inactivity.

The protective cover of the scale is designed to also be used as a platform expansion tray.