Need help?Do you have a question about the MyWeigh KD-7000 and is the answer not in the manual?
The scale can be powered by an AC adaptor; use the correct adapter to avoid damage.
Low batteries or bad connections are common causes of scale malfunction and inaccuracy.
Instructions for opening the battery cover, inserting batteries, and closing the cover.
Steps for turning on the scale, selecting units, and starting to weigh items.
How to use the tare function to eliminate the weight of an empty container.
Requires an accurate 5kg weight; procedure involves pressing specific keys and placing weight.
Adjusts the scale's response time from slowest ('nb0') to fastest ('nb2').
Configures automatic turn-off time (disabled, 2 min, or 5 min) for battery conservation.
Scale performs a quick diagnostic check and countdown upon turning on.
Displays '-------' to indicate overload; removing load is crucial to prevent damage.
Allows holding the current weight reading on the display.
Switch on the back of the scale to enable or disable the display backlight.
Switch on the back of the scale to enable or disable audible beeps.
Instructions on how to lift and slide the cover to avoid inaccurate readings.
To Next Page
General
