Need help?Do you have a question about the MyWeigh KD-8000 and is the answer not in the manual?
The scale can be powered by an AC adaptor- output is DC 5V 300mA. Use the correct adapter.
Low batteries cause malfunction. Use good quality batteries & replace them often. Remove if storing for >14 days.
Turn on the scale, select unit (g, kg, oz, lb, lb:oz), place object, and read stable weight.
Eliminates container weight. Place container, press TARE, add items. Press TARE again to zero.
May be needed for setup, altitude changes, or mechanical deviations. Requires a 5kg weight.
Adjust scale response speed (nb0-nb2) and auto-off timer (OFF 0, OFF 1, OFF 2).
The scale performs a quick diagnostic, displaying a countdown on startup.
Display shows '-------' indicating overload. Remove load immediately to prevent damage.
Tared value shown as negative number when weight removed. Press TARE to re-zero.
An automatic shut off feature is provided to conserve battery power.
Press [HOLD] to freeze current weight reading. Press [HOLD] again to cancel.
Switch on the back of the scale enables or disables the backlight.
A switch on the back enables or disables the beep feature.
Clear cover protects LCD. Ensure it doesn't touch tray underside for accurate readings.
Calculate recipe ingredients in percentages, with flour as 100%. Add ingredients sequentially.
General| Capacity | 8000g |
|---|---|
| Display | LCD |
| Auto-Off | Yes |
| Readability | 1g |
| Power Source | AC Adapter |
| Weighing Modes | g, oz |
| Features | Tare function, Hold function |
| Units of Measurement | grams, kilograms, pounds, ounces |
To Next Page
