Where:
STATUS: indicates the status of the instrument and any failure.
UNIT OF MEASURE: shows the current unit of measure (metres or feet)
ANIMATION: an animated anchor or capstan shows the direction of the movement.
COUNT: indicates the measurement of the chain lowered (in metres or feet).
CHANGE OF MODE: this icon is displayed when there is a change in working mode (windlass mode or
capstan mode)
SPEED: indicates the chain speed during hoisting or lowering in meters per minute (mt/m) or feet per
minute (ft/m)
SUPPLY VOLTAGE: indicates the power supply voltage.
When the instrument is turned on for the first time, it will set up as programmed in the factory (see table).
To Next Page
Loading...
Need help?
General
