N-Com B901-R User Manual

EN
18
14. N-COM INTERCOM (SERIES “900”)
The N-Com B901 system allows communication with other N-Com systems, up to a maximum
distance of about 700 m (in open field, with no obstacles). The range of the communication varies
depending on the N-Com systems used.
N.B.: The range and quality of the communication may vary significantly depending on the presence
of obstacles, weather conditions, magnetic fields.
14.1. N-Com “600”/”900” Series Intercom pairing up
Important: The procedure described below refers exclusively to the pairing up between the
“600”/”900” series N-Com systems.
• Make sure the systems are turned off.
• Put the systems in “Configuration” mode: press the “
ON” key and keep it pressed for 4 seconds,
until you hear the voice announcement “
Configuration Menu ”.
• On both systems, press the key “5” until you reach the option “
Intercom pairing ”.
• On system A, press the key pertaining to the “pre-setting position” where you wish to save
system B.
Pairing up CHANNEL 1 Briefly press “n”.
Pairing up CHANNEL 2 Press the “n” key twice.
Pairing up CHANNEL 3 Press the “n” key three times.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
14.2. Pairing up other N-Com intercoms
Important: The procedure described here below refers exclusively to the pairing up of “900” series N-
Com systems with N-Com systems OTHER THAN the “600”/”900” series
1
.
• Make sure the systems are turned off.
• Put the N-Com system in “Setting” mode: press the “
ON” key and keep it pressed for 4 seconds,
until the blue LED starts to flash quickly.
• Put B901 system in “Configuration” mode: press the “
ON” key and keep it pressed for 4 seconds,
until you hear the voice announcement “
Configuration Menu ”.
• On B901 system, press the key “5” until you reach the option “ Intercom pairing ”.
• Press the “
ON” key: selection of the right pairing up mode is confirmed by a change in the
“standby” tone (high beep) and by the voice announcement “ Pairing up other N-Com systems ”.
• On B901 system, press the key pertaining to the “pre-setting position” where you wish to save the
other N-Com system.
Pairing up CHANNEL 1 Briefly press “n”.
Pairing up CHANNEL 2 Press the “n” key twice.
Pairing up CHANNEL 3 Press the “n” key three times.
1
Except for Bluetooth kit and Bluetooth kit2, which are not compatible

N-Com B901-R Specifications

General

Brand	N-Com
Model	B901-R
Category	Motorcycle Accessories
Language	English