N-Com BX5 User Manual

BX5
9
Fig. 4
Fig. 5 Fig. 6a
Fig. 6b Fig. 7
Fig. 8
Only for X701 – X603 - X602 helmets :
 Take the polystyrene cheek pads that have just
been removed and, using a pair of scissors,
remove the round insert by cutting the fabric
securing points. (Fig. 8)
 Keep the foam used to cover the speakers
housing in case you wish to use the helmet
without the Bluetooth Kit system.
Fig. 9 helmets X702GT - X701 – X603 Fig. 10 helmet X702
 In case the helmet is equipped with noise reducers on the comfort padding, lift them up.
 Take the comfort padding, left-hand and right-hand side and, if equipped, cut the pre-drilled tab as
shown in fig. 9 and fig. 10.

N-Com BX5 Specifications

General

Brand	N-Com
Model	BX5
Category	Conference System
Language	English