N-Com multi 3 User Manual

14
9. MUSIC VIA BLUETOOTH
You can listen to high quality music by connecting the N-Com system to a device equipped with
Bluetooth A2DP (Advanced Audio Distribution Profile) protocol.
The N-Com system is also equipped with Bluetooth AVRCP (Audio Video Remote Control Profile)
protocol, which allows you to stop and resume music reproduction directly from the helmet (with
devices equipped with AVRCP).
Play music (Play) Press the “” button and keep it pressed for 2 seconds.
Pause function (Pause)
When the player is connected and playing music, press “” for 2
seconds.
Next track (Skip) When the player is playing music, press “” for 4 about seconds.
Stop playing music (Stop)
Press “” for 2 seconds. The music stops and the A2DP player is
disconnected.
By moving to another function with the menu key, the system automatically disconnects the A2DP
device.
Note: The Bluetooth intercom does not work while listening to an A2DP audio source.
10. N-COM AND SMARTPHONE
The N-Com system allows you to manage the different features available on your Smartphone.
Making and receiving phone calls
Read the specific chapter – Chapter 6
Listening to music stored on your Smartphone
 Pair up and connect the N-Com system to your mobile phone (Chapter. 5)
 Press the “” button and keep it pressed for 2 seconds
Music will now be played inside the helmet. For other commands, see Chapter 9.
Using the navigator on the Smartphone
 Pair up and connect the N-Com system to your mobile phone (Chapter 5)
 Press the “” button and keep it pressed for 2 seconds, to activate the A2DP profile
 After having activated the playing of music, press the “” button and keep it pressed for 2
seconds, to put the music in pause mode.
 Turn on the navigator directly from your Smartphone
The navigator directions will now be transmitted inside the helmet.

N-Com multi 3 Specifications

General

Brand	N-Com
Model	multi 3
Category	Conference System
Language	English