North American Clutch & Driveline
Rockford, Illinois
Phone: (800) 383-9204
(815) 282-7960
Fax (815) 282-9160
www.naclutch.com
4
Safety
General
Safe practices must be employed by all personnel operating and servicing this unit. NACD will not be
responsible for personal injury resulting from careless use of hand tools, lifting equipment, power tools, or
unaccepted maintenance/operating practices.
Important Safety Notice
Because of the possible danger to person(s) or property from accidents which may result from the use of
manufactured products, it is important that correct procedures be followed. Products must be used in
accordance with the engineering information specied. Proper installation, maintenance, and operation
procedures must be observed. Inspection should be made as necessary to assure safe operations under
prevailing conditions. Proper guards and other suitable safety codes should be provided. These devices
are neither provided by NACD nor are they the responsibility of NACD. The maximum safe operating
speeds of this 11.5" triple plate (TP) NACD power take-off is 2800 RPM.
Sources of Service Information
Each series of manuals issued by NACD is current at the time of printing. When required, changes are
made to reect advancing technology and improvements in state-of-the-art.
Individual product service bulletins are issued to provide the eld with immediate notice of new service
information.
For the latest service information on NACD products, contact any NACD distributor, or contact the sales
department, NACD, PO Box 15130, Rockford, IL 61132-5130, USA or by email at sales@naclutch.com.
To Next Page
Loading...