Need help?Do you have a question about the NAD 3020A and is the answer not in the manual?
General| Total Harmonic Distortion | 0.02% |
|---|---|
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Dimensions | 420 x 96 x 240 mm |
| Type | Stereo Integrated Amplifier |
| Power Output | 20 watts per channel into 8Ω (stereo) |
| Frequency Response | 20Hz to 20kHz |
| Signal to Noise Ratio | 95dB (line) |
Connects turntable ground wire and signal cables for optimal playback.
Selects cartridge type and connects tuner/auxiliary audio sources.
Interfaces for tape recorders and external signal processors/amplifiers.
Connects stereo speakers using appropriate gauge wire for optimal audio output.
Guide for connecting multiple speaker pairs and powering accessories via AC outlets.
Reduces amplifier distortion when overdriven, improving sound quality at high volumes.
Controls for power, private listening via headphones, and stereo channel balance.
Adjusts bass, treble frequencies, and overall sound loudness.
Displays peak power output to loudspeakers, indicating when Soft Clipping is needed.
Alerts user to potential risk of electric shock from uninsulated components.
Highlights the presence of critical operating and maintenance instructions in literature.
Explains thermostatic circuit breakers that protect the amplifier from overheating.
To Next Page
