Need help?Do you have a question about the NAD T 748 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Amplifier Type | Class AB |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| USB Port | Yes |
| Bluetooth | No |
| Wi-Fi | No |
| Tuner | AM/FM |
| Power Output | 80W per channel (8 ohms, 20Hz - 20kHz, 0.08% THD) |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Frequency Response | 20 Hz - 20 kHz |
Compliance with FCC rules for digital devices and residential installations.
Instructions to prevent fire or electric shock. Read and follow all warnings.
Proper disposal of electrical equipment and waste batteries.
Lists contents of the box and guidance on choosing a location for the receiver.
Guidance on default input source configurations.
Identifies and explains the controls on the front panel of the T 748 receiver.
Identifies and explains the connections on the rear panel of the T 748 receiver.
Explains the functions and operation of the AVR 4 remote control.
Overview of the T 748's main menu, listening modes, and adjustments.
How to customize parameters for various listening modes.
Explains DSP options like Lip Sync Delay and Tone Controls.
Guides through the T 748's setup menu for configuration.
Details on auto calibration, speaker levels, and HDMI control settings.
Configuration for Dolby Digital and DTS audio formats and modes.
Instructions for tuning and managing AM, FM, and DAB radio broadcasts.
Connecting and controlling an iPod player with the T 748 receiver.
Common problems and their possible solutions for the T 748 receiver.
Detailed technical specifications for amplifier, tuner, power consumption, and physical attributes.
To Next Page
