Nagman 650-H User Manual

NAG/IM/650-H/01/22 15
 This instrument must be plugged into a 230V AC,
50Hz (Optional 115V AC, 60Hz), electric outlet only.
 The power cord of the instrument is equipped with a
three-pin grounding plug for protection against
electrical shock hazards. It must be plugged directly
into a properly grounded three-pin socket. The
receptacle must be installed in accordance with local
codes and ordinances. Do not use an extension cord
or adapter plug.
 If supplied with user accessible fuses, always replace
the fuse with one of the same rating, voltage, and
type.
 Always replace the power cord with an approved
cord of the correct rating and type.
 Turn off the Instrument immediately, during main
power fluctuation. Power bumps from brown-outs
could damage the instrument. Wait until the power
has stabilized.
 Do not remove the fuse box from the socket until the
power cord has been disconnected.
 If the fuse blows immediately after you have
replaced them, the calibrator should be returned to
the manufacturer for service.

Nagman 650-H Specifications

General

Brand	Nagman
Model	650-H
Category	Test Equipment
Language	English