How to fix Nagman MTC when power is not ON?
If your Nagman Measuring Instruments unit won't power on, first ensure that the power switch is turned on and that the unit is receiving power. If the issue persists, check the fuse and replace it with a fuse of the same rating if it's defective.
Why is the fan not working in my Nagman Measuring Instruments?
If the fan in your Nagman Measuring Instruments is not working, check the fan supply voltage. If there's no issue with the voltage, consider replacing the fan.
What to do if there is no light in display of Nagman MTC Measuring Instruments?
If there is no light in the display of your Nagman Measuring Instruments, ensure that the display is receiving 5V. Check the fuse; if it's defective, replace it with a fuse of the same rating.
General| Category | Measuring Instruments |
|---|---|
| Display | LCD |
| Control Algorithm | PID |
| Type | Temperature Calibrator |
| Power Supply | 230V AC, 50Hz |
| Communication | RS-232 |
| Series | MTC Series |
Details on the construction and function of the heater block.
List of items included with the basic instrument purchase.
Additional items that can be purchased for the instrument.
Diagrams and details for connecting the instrument for switch testing.
Connection details for RTD, Thermocouple, and mA signal inputs.
Explanation of passive and active mA loop connection types.
Information on power inlet socket and PC interface connections.
Detailed explanation of keypad buttons and their functions.
Description of the instrument's display segments and their meanings.
Explanation of safety symbols and their meanings.
Conditions that may pose hazards to the user during operation.
Cautions regarding conditions that could damage the instrument.
Areas of the instrument that become hot during operation.
Precautions to avoid electrical shock hazards.
Steps for switching on, setting defaults, and selecting modes.
Procedure for setting desired temperature and selecting measurement parameters.
Instructions for performing mA measurements.
Procedure for testing thermostat switch points.
Steps for locating and replacing the instrument's fuse.
Table of common issues, their causes, and solutions.
Guidelines for returning the instrument for manufacturer service.
To Next Page
