TUN (tuner mode)
Page 1 of 1
up Depending on the operational mode selected,
adjusts the tuning frequency upwards
(frequency mode), searches for stations up
the FM band (scan mode) or selects the next
station preset (preset mode).
down Controls the tuner in a similar manner to the
up key.
prog Selects preset program mode that enables
specific FM stations to be assigned to preset
memory.
disp Switches the tuner display on or off.
mono Combines the left and right channels
and may improve reception on weak signals.
mode Selects frequency, scan and preset modes.
numeric Directly select station presets.
AV (av processor mode)
Page 1 of 3
input+ Selects the next input.
input- Selects the previous input.
mode- Selects the previous decode mode.
mode+ Selects the next decode mode.
osd Selects On Screen Display operational mode
and shows current system status.
disp Switches the processor display on and off.
midn Selects midnight operational mode.
menu Used in setup mode.
numeric Directly selects processor inputs.
Page 2 of 3
The master key functions on AV Page Two are duplicates of
Page One. However, selection of Page Two switches the
function of the numeric keys to direct selection of
processor decode modes.
Page 3 of 3
up Selects the previous AV setup parameter or
moves the OSD cursor upwards.
down Selects the next AV setup parameter or moves
the OSD cursor downwards.
left Selects the previous AV parameter value or
moves the OSD cursor to the left.
right Selects the next AV parameter value or moves
the OSD cursor to the right.
input Switches the AV processor into input setup
mode.
spkr Switches the AV processor into speaker setup
mode.
enter Confirms option selection during OSD control.
clear Clears option selection during OSD control.
numeric No function.
Flash Handset
15.3 cd track programming
In CD mode the prog key (display Page Two) enables
specific CD tracks and their play order to be programmed.
To program a play order select a track number from the
numeric keypad followed by the prog key until the desired
selection is complete. During selection, the track number
indicated in the player display will be followed by either
P
or — . P indicates that the track is already selected, —
indicates that the track can be selected.
The prog key can also be used to delete tracks from a play
order. To delete a track, press and hold the prog key until
the prog indicator in the CD display illuminates then delete
the track or tracks using the numeric keypad followed each
time by a further operation of the prog key. During deletion
the track number indicated in the player display will be
followed by either
C or — or no display. C indicates that the
track is already deleted,
— indicates that the track can be
deleted while no display indicates that this is the only track
remaining and therefore cannot be deleted.
The CD player can be programmed with a random play
order (from stop with no play order already in place) by
pressing prog followed by 1. Similarly, to program a reverse
play order, press prog followed by 2.
Play orders can be reviewed by pressing prog while the
player is either stopped or playing. The player display will
then scroll through the selected tracks. The prog indicator
on the player display will illuminate when a play order has
been programmed. To clear the program memory press and
hold the stop key.
18
To Next Page
Loading...
