Need help?Do you have a question about the NAIM CD555 and is the answer not in the manual?
General| Frequency range | 10 - 20000 Hz |
|---|---|
| Total Harmonic Distortion (THD) | 0.1 % |
| Built-in speaker(s) | No |
| CD-RW playback | Yes |
| Playback disc formats | CD audio |
| Device type | HiFi CD player |
| MP3 playback | - |
| Product color | Black |
Weight and Dimensions| Depth | 314 mm |
|---|---|
| Width | 432 mm |
| Height | 114 mm |
Details on using Naim interconnect cables and cleaning sockets.
Wiring instructions for mains plugs and Naim power cables.
Information about replacing fuses in Naim equipment.
Safety advice for disposing of non-rewirable mains plugs.
Guidance on mains circuits and the use of Naim power cables.
Advice on positioning Naim equipment to minimize hum and ensure stability.
Procedure for switching Naim equipment on and off safely.
Explanation of the Naim equipment run-in period and its impact on performance.
Guidance on minimizing radio frequency interference with Naim equipment.
Safety measures to protect Naim equipment from lightning strikes.
Advice on troubleshooting and contacting Naim or retailers for assistance.
Information on authorized service, repairs, and updates for Naim equipment.
Instructions for removing and replacing transit screws on the CD555.
Diagram and table identifying CD555 transit screw types and locations.
Details of the rear panel connections for the CD555 player.
Diagram showing how to connect the CD555 to the CD 555PS power supply.
Procedure for loading CDs into the CD555 player.
Guidance on cleaning the CD555 transport platter and puck.
Steps to reset and calibrate the CD555 player door mechanism.
Details the rear panel connections and ports for the CDX2 player.
Instructions for connecting the CDX2 to an XPS power supply.
How to select between analogue and S/PDIF digital outputs on the CDX2.
Procedure for loading CDs into the CDX2 player.
Instructions for upgrading the CDX2 with external power supplies.
Guidance on cleaning the CDX2 transport platter and puck.
Details the rear panel connections and ports for the CD5 XS player.
Instructions for connecting the CD5 XS to a FlatCap XS power supply.
How to select between analogue and S/PDIF digital outputs on the CD5 XS.
Procedure for loading CDs into the CD5 XS player.
Instructions for upgrading the CD5 XS with external power supplies.
Guidance on cleaning the CD5 XS transport platter and puck.
Details the rear panel connections and ports for the CD5si player.
Procedure for loading CDs into the CD5si player.
Guidance on cleaning the CD5si transport platter and puck.
Overview of the CD player control buttons and their functions.
Explanation of alternative control modes for Naim CD players.
Description of the CD player's display indicators and their meanings.
How to select between DIN and RCA phono output sockets.
Instructions on operating the R-com remote handset and its modes.
Details the functions of the R-com remote handset keys.
Overview of NARCOM 4 handset operation and key types.
Instructions for programming play orders using the NARCOM 4 handset.
Details the functions of the NARCOM 4 handset keys.
Illustration of the puck used for the CD555 player.
Illustration of the puck used for CDX2 and CD5 XS players.
Illustration of the puck used for the CD5si player.
To Next Page
