Need help?Do you have a question about the NAIM CDS and is the answer not in the manual?
General| Wavelength | 780nm |
|---|---|
| Dimensions (H x W x D) | 87 x 432 x 314mm |
| Weight | 11.8kg |
| Mechanism | Philips CDM-9 Pro |
| Digital to Analogue Converter | Burr-Brown PCM1702 |
| Frequency Response | 10Hz to 20kHz ±0.1dB |
| THD | <0.1% |
| Phase Response | Linear phase |
| Laser Type | Semiconductor |
| Disc Compatibility | CD, CD-R |
| Analog Outputs | RCA |
| Total Harmonic Distortion | <0.1% |
Guidance on using and connecting Naim interconnect and loudspeaker cables for optimal performance and safety.
Procedure for safely switching Naim components on and off, emphasizing amplifier power sequencing.
Information on the initial break-in period for Naim equipment and best practices for performance.
Recommendations for mains supply connections, fuse ratings, and circuit considerations for optimal performance.
Guidance on proper placement of Naim equipment to avoid interference and ensure stability.
Advice on troubleshooting issues, contacting dealers, and the importance of authorized repairs.
Discussion of mechanical noise from transformers due to mains waveform distortion.
Discussion of potential radio frequency interference and its impact on Naim equipment performance.
Essential precautions against lightning strikes and exposure to liquids for equipment safety.
Crucial safety directives including protection from liquids, unauthorized modifications, and opening equipment.
Instructions for correctly connecting the mains lead wires to the plug terminals based on wire colour.
Safety warning regarding the disposal of cut-off non-rewireable mains plugs to prevent shock hazards.
Guidance on correct replacement for fuse carriers and specification for approved plug fuses.
Explanation of what the player's display shows in load and play conditions.
Details on using previous, next, pause, stop, and play buttons for disc control.
Description of the 'track', 'time', 'repeat', and 'program' indicator lights.
Diagram illustrating the wiring connections for the CDS player and XPS power supply.
Step-by-step guide on how to place a compact disc onto the platter.
Explanation of previous, next, stop, and play button functions for CDX player.
Description of the 'pause', 'time', 'repeat', and 'program' indicator lights on the CDX player.
Step-by-step guide on how to open the CDX player drawer.
Details on using previous, next, stop, and play buttons for CD5 player operation.
Description of the 'pause', 'time', 'repeat', and 'program' indicator lights on the CD5 player.
Wiring diagram for connecting the CD5 player to a Flatcap 2 power supply.
Step-by-step guide on how to open the CD5 player drawer.
Keys that switch Soft Key modes for preamp, CD, or tuner components.
Keys that operate specific functions regardless of component mode, like volume and mute.
Remote control buttons for CD playback: prev, next, stop, play, <<, >>, repeat, pause.
Using the numeric keypad for input selection, track selection, or station tuning.
How to use the prog key for volume control, automatic source switching, and CD track programming.
Instructions for cleaning the transport platter and disc clamp using Blu-tak and a soft brush.
Detailed technical specifications for the CDS CD player.
Detailed technical specifications for the CDX CD player.
Detailed technical specifications for the CD5 CD player.
Identifies Naim Audio Limited as the manufacturer and lists compliant products.
Lists safety (EN 60065) and EMC (EN 55013, EN 55020) standards tested against.
To Next Page
